K-TECK SUPERGLIDE 100

sUPERGLIDE 100.png

Factory Polished Smooth wear plate is ideal for Cement and concrete application were fine particle dust builds up and does not discharge causing hang up issues in fixed plant and mobile plant applications. Ideal for chutes , classifier cones, bin liners, cyclones, fan blades, Truck tray, dozer blades,    
 NON Directional K-TECK OEM 100 wear plate is the general purpose of wear plate to increase life cycle over the STD QT or AR plate. More suited to the Mobile earth moving equipment of medium wear abrasion to low impact applications, the matrix structure is a Austenitic high chrome carbide saturation of more than 35% of chrome meets the ASTM G65-04 dry sand rubber wheel test of less than 0.3 grams loss. 

Superglide Plate.png
Wear Plate Specifications 

K-TECK wear resistant steel (WRS) is a Bi metallic hard facing surface of up to 700 HV of hardness of a HYPER EUTECTIC chemistry bonded to Mild steel A36 backing plate for easy methods of installation. K-TECK Superglide

series sheet size  9.00’ x 6.5’.

A36 Backing Plate Material

The standard A36 steel backing plate is ideal for multiple installations methods. The backing plate in a variety of thickness to suite all applications.

Thermal Expansion Relief Cracks

The K-TECK series of wear resistance steel has inherent cracks due the metallurgical structure of the high chrome, these crack are not structural cracks that will cause the plate to break. These cracks are Thermal expansion relief cracks and enhances bending and rolling under compression. These thermal expansion Relief joints are common in most ALL CCO wear plates and is commonly visible. 

Overlay Material Type

The K-TECK OEM series is a high saturation of M7C3 carbides of a austenite matrix and complies the AS2576-2355 STD.

Metallurgical Testing Type

The K-TECK series of wear resistance steel is complies with the ASTM G65 sand wheel test procedure with a chromium carbide of M7C3 saturation. 

K-TECK Superglide 100 can be used in a variety of mobile and fixed plant applications when EXTREME moisture and carry back are an issue.